BP 800AS
TECHNICAL SPECIFICATIONS
|
Model |
BP 800AS |
|
Power Supply |
220 - 240 / 380 - 415 V |
|
3PH + PE / 3PH + N + PE | |
|
50/60 Hz | |
|
Installed Power |
17180 W |
|
Air Pressure |
6 Bar |
|
Required Air |
13 Nl/p |
|
Maximum Output |
up to 12 ppm** |
|
Product Maximum Height |
380 mm |
|
Sealing Bar |
760 mm |
|
Maximum Size Of Film Reel |
750 x Ø 350 mm |
|
Working Board Elevation |
940-1105 mm |
|
Machine Size |
3035 x 1245 x mm |
|
h 2150-2315 mm | |
|
Machine Net Weight |
640 Kg |
|
Packed Machine Size |
3135 x 1360 x h 2340 |
|
Packed Machine Weight |
700 Kg |
|
Advised Film: LDPE |
30 - 100 µ |
(**) The stated speed can change according to the product size, the pack collation and the type of film used
MAIN FEATURES
Ø Automatic in-line shrink wrapper
Ø Mono block frame
Ø Mono-chamber tunnel
Ø Maximum pack length: 1200 mm
Ø In feed conveyor with adjustable speed controlled by Inverter
Ø Motorized upper film unwinding controlled by Inverter
Ø Motorized lower film unwinding
Ø In feed conveyor product guides adjustable in height and width
Ø Possibility to make reference either to the photocell reading or to the pack length
Ø Tunnel belt with adjustable speed controlled by Inverter
Ø Automatic, semiautomatic, pass through mode
Ø Pneumatic sealing bar
Ø Pneumatic film cut by cold blade
Ø Sealing bar equipped with safety sensors
Ø Rollers positioned on the upper and lower unwinders to make easier the reels loading
Ø Metric graduation based film reels centering system
Ø Flextron® electronic control system working by means of an LCD alphanumeric control panel, equipped with a 16 bit microprocessor with integrated modular board of the power circuit, composed of:
Ø Power Base card
Ø Independent Inverter cards
Ø In/Out control modules
Ø Included: feet for the machine fastening and wheels for the machine moving operations, press rod to stop products, cooling fan at the tunnel outlet
Ø Such system allows a simple and accurate control of all current operations, that is:
Ø Up to 20 different working cycles
Ø Automatic control of the bars height
Ø Speed adjustment of the shrink wrapper and tunnel conveyors by means of an Inverter
Ø Process statistics:
Ø pack length identification
Ø instantaneous production
Ø machine efficiency
Ø detection of faulty packs
Ø Tunnel air flow adjustable by means of independent deflectors
Ø Tunnel conveyor equipped with heat-resistant glass fiber bars (SMI patent) and with an additional central chain which ensures that:
Ø the conveyor stiffness grants stability to the products passing through, for a compact and well-shrunk pack
Ø the conveyor can bear a product weight up to 30 kilos
Ø the conveyor bars never get rusted, as it happens when using traditional metallic conveyors
Ø the maintenance is easy and low-cost, thanks to the possibility of replacing just the worn out bars
Ø Tunnel automatic turn-off system
Ø Low power consumption
Ø Compliance with CE regulations